Well today was pretty much the same as yesterday, more continued demo of the old fuel shed. I managed to get the roof dismantled, salvaging the 2x4's as well as the corrugated sheet metal. Most of the burning that was done was of the old OSB plywood from the roof. The stuff was at least worn out enough that I was able to break the stuff into pieces small enough to stick into the burn can.
After getting the roof broken up I moved on to the rear wall. Again, more old OSB was removed and tossed into the burn can. The pallets that were used for the wall were separated and staged with the rest of the salvage wood. At this point with the walls down most of the work was breaking up the OSB to burn up. Near the end of this session I did start on the floor a little bit, breaking up some of the rotted material to be tossed in the burn can as it burned its way down. I ended up having to just form a pile of broken up OSB to throw into the burn can tomorrow morning when I try to wrap things up with the floor disassembly. If that goes pretty quick I may be able to start cutting up the pallet boards I have staged by the storage trailer, otherwise I'll continue with this on Thursday.
0 Comments
Leave a Reply. |
Archives
May 2023
|